Produzione Scientifica Vincenzo Maria Sglavo


  • M. Piccinini, A. Rebaudi, V.M. Sglavo, F. Bucciotti, P. Robotti, "A New HA/TTCP Material for Bone Augmentation: An In Vivo Histological Pilot Study in Primates Sinus Grafting" in IMPLANT DENTISTRY, v. 22, n. 1 (2013), p. 83-90 - vedi dettaglio
  • R. Raj, M. Cologna, A.L.G. Prette, V. Sglavo, "Methods of flash sintering", US 2013/0085055 A1. - Data di deposito: 2013 - vedi dettaglio
  • E. Mura, J. Lousteau, D. Milanese, S. Abrate, V.M. Sglavo, "Phosphate glasses for optical fibers: Synthesis, characterization and mechanical properties" in JOURNAL OF NON-CRYSTALLINE SOLIDS, v. 362, (2013), p. 147-151 - vedi dettaglio
  • V.M. Sglavo, "Ceramic laminates" in L. Nicolais, A. Borzacchiello, S.M. Lee (a cura di), Wiley Encyclopedia of Composites, 5 Volume Set, 2nd Edition, Hoboken, New Jersey, USA: John Wiley &Sons, 2012, p. 241-250. - ISBN: 9780470128282 - vedi dettaglio
  • E. Kamseu, V. Catania, C. Djangang, V.M. Sglavo, C. Leonelli, "Correlation between microstructural evolution and mechanical properties of a-quartz and alumina reinforced K-geopolymers during high temperature treatments" in ADVANCES IN APPLIED CERAMICS, v. 111, n. 3 (2012), p. 120-128 - vedi dettaglio
  • E. Kamseua, M.C. Bignozzi, U.C. Melo, C. Leonelli, V.M. Sglavo, "Design of inorganic polymer cements: Effects of matrix strengthening on microstructure" in CONSTRUCTION AND BUILDING MATERIALS, v. 38, (2012), p. 1135-1145 - vedi dettaglio
  • J.A. Downs, K. Naik, Anshu, V.M. Sglavo, "ELECTRICAL FIELD-ASSISTED SINTERING IN ADVANCED CERAMICS" in Atti XI Convegno nazionale AIMAT, cassino (FR): Tipografia Pontone, 2012, p. 213-216. Atti di: XI Convegno nazionale AIMAT, Gaeta (LT), 16-19 settembre 2012 - vedi dettaglio
  • V.M. Sglavo, "INFLUENCE OF BATH COMPOSITION ON CHEMICAL STRENGTHENING PROCESS OF COMMERCIAL SILICATE GLASS" in The Materials Science & Technology 2012 Conference and Exhibition proceedings, Westerville, OH, USA: MS&T '12 - http://www.matscitech.org, 2012, p. 221-228. - ISBN: 9780873397612. Atti di: MS&T'12, Pittsburgh, PA, USA, 7th-11th October 2012 - vedi dettaglio
  • V.M. Sglavo, "Influence of KNO3 Bath Composition on Ion Exchange Process of Commercial Soda Lime Silicate Float Glass" in A. Kilisliog (a cura di), Ion Exchange Technologies, Rijeka; Croatia: InTech, 2012. - ISBN: 9789535108368. - DOI: 10.5772/2925 - vedi dettaglio
  • V. M. Sglavo, "INFLUENZA DELLA COMPOSIZIONE DEL BAGNO DI SALE FUSO SULLA TEMPRA CHIMICA DI VETRO DI SILICATO SODICO-CALCICO" in Atti XI Convegno nazionale AIMAT, Cassino (FR): Tipografia Pontone, 2012, p. 491-493. - ISBN: 9788897930037. Atti di: XI Convegno nazionale AIMAT, Gaeta (LT), 16-19 settembre 2012 - vedi dettaglio
  • E. Mura, J. Lousteau, D. Negro, D. Milanese, V.M. Sglavo, "MECHANICAL CHARACTERIZATION OF PHOSPHATE GLASS OPTICAL FIBRES" in nternational Glass Fiber Symposia Proceedings, Aachen; Deutschland: RWTH Aachen University, 2012. - ISBN: 9783000398605. Atti di: International Glass Fiber Symposia, Aachen, Deutschland, 16th-19th October 2012 - vedi dettaglio
  • A. Azzolini, G. Fantini, E. Vitorbi, V.M. Sglavo, "PRODUZIONE E OTTIMIZZAZIONE DELL’ELETTROLITA A BASE DI CERIA DROGATA GADOLINIA PER SOFC TUBOLARI" in Atti XI Convegno nazionale AIMAT, Cassino (FR): Tipografia Pontone, 2012, p. 21-24. Atti di: XI Convegno nazionale AIMAT, Gaeta (LT), 16-19 settembre 2012 - vedi dettaglio
  • M. Casarin, R. Ceccato, V.M. Sglavo, "Tailoring the anode microstructure in micro-tubular SOFCs by the optimization of the slurry" in M. Halbig, S. Mathur (a cura di), Advances in Solid Oxide Fuel Cells VIII, Hoboken, NJ: John Wiley & Sons, 2012, p. 23-33. - (Ceramic Engineering and Science Proceedings; 33(4)). - ISBN: 9781118205945 - vedi dettaglio
  • R. De La Torre, V. M. Sglavo, "Fabrication of Innovative Compliant Current Collector-Supported Microtubular Solid Oxide Fuel Cells" in INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, v. 2011, (2011) - vedi dettaglio
  • A.L.G. Prette, M. Cologna, V.M. Sglavo, R.Raj, "Flash-sintering of Co2MnO4 spinel for solid oxide fuel cell applications" in JOURNAL OF POWER SOURCES, v. 196, (2011), p. 2061-2065 - vedi dettaglio
  • V.M. Sglavo, F. De Genua, "High Reliability Alumina-Silicon Carbide Laminated Composites by Spark Plasma Sintering" in Rosario Gerhardt (a cura di), Properties and Applications of Silicon Carbide, Rijeka, Croatia: Intech, 2011, p. 427-444. - ISBN: 9789533072012 - vedi dettaglio
  • F De Genua, V Sglavo, "High Strength Engineered Alumina-Silicon Carbide Laminated Composites by Spark Plasma Sintering" in PROCEDIA ENGINEERING, v. 10, (2011), p. 2621-2626 - vedi dettaglio
  • V. Sglavo, M. Piccinini, A. Madinelli, F. Bucciotti, "HYDROXYPATITE SCAFFOLDS FOR BONE TISSUE ENGINEERING WITH CONTROLLED POROSITY AND MECHANICAL STRENGTH" in Ceramic Engineering and Science Proceedings - Ceramic Materials for Energy Applications - Advances in Bioceramics and Porous Ceramics IV, Westerville, OH, USA: The American Ceramic Society, 2011, p. 95-100 -(Ceramic Engineering and Science Proceedings; 32 (6)). - ISBN: 9781118155820. Atti di: 35th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, USA, January 23-28, 2011 - vedi dettaglio
  • V.M. Sglavo, F. De Genua, A. Conci, R. Ceccato, R. Cavallini, "Influence of curing temperature on the evolution of magnesium oxychloride cement" in JOURNAL OF MATERIALS SCIENCE, v. 2011, n. 46 (2011), p. 6726-6733 - vedi dettaglio
  • A. Arregui, L. Rodriguez-martinez, S. Modena, J. van Herle, M. Bertoldi, V. Sglavo, "INFLUENCE OF OPERATIONAL PARAMETERS ON LSCF AND LSF STABILITY" in Ceramic Engineering and Science Proceedings - Advances in Solid Oxide Fuel Cells VII, Westerville, OH, USA: The American Ceramic Society, 2011, p. 67-76 -(Ceramic Engineering and Science Proceedings; 32 (4)). - ISBN: 9781118155820. Atti di: 35th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, OH, January 23-28, 2011 - vedi dettaglio
  • A. Arregui, L. M. Rodriguez-martinez, S. Modena, J. van Herle, M. Bertoldi, V. M. Sglavo, "Influence of Operational Parameters on LSCF and LSF Stability" in N. P. Bansal, P. Singh, S. Widjaja, D. Singh (a cura di), Advances in Solid Oxide Fuel Cells VII: Ceramic Engineering and Science Proceedings, Hoboken, NJ, USA: John Wiley & Sons, 2011, p. 67-76. - ISBN: 9781118059890 - vedi dettaglio
  • F. Bucciotti, M. Piccinini, V.M. Sglavo, "METODO PER LA REALIZZAZIONE DI UN BIOMATERIALE A BASE DI CALCIO FOSFATO SOTTO FORMA DI GRANULI E/O LORO AGGREGATI E BIOMATERIALE OTTENUTO CON LO STESSO", ITVR20110069. - Data di deposito: 2011 - vedi dettaglio
  • Mashhadi, M., Taheri-nassaj, E., Mashhadi, M., Sglavo, V.M., "Pressureless sintering of B4C-TiB2 composites with Al additions" in CERAMICS INTERNATIONAL, v. 37, n. 8 (2011), p. 3229-3235 - vedi dettaglio
  • V. M. Sglavo, "Problemi di integrità e rottura in componenti di vetro e ceramica" in N. Augenti, B. M. Chiaia (a cura di), INGEGNERIA FORENSE. METODOLOGIE, PROTOCOLLI, CASI STUDIO, palermo: Dario Flaccovio Editore srl, 2011, p. 405-451. - ISBN: 9788857901015 - vedi dettaglio
  • De La Torre, R., Casarin, M., Sglavo, V.M., "Production of compliant current collector-supported micro-tubular solid oxide fuel cells" in ECS TRANSACTIONS, v. 2011, n. 35(1) (2011), p. 747-755 - vedi dettaglio
  • R. De la Torre, M. Casarin, V. Sglavo, "PRODUCTION OF CURRENT COLLECTOR-SUPPORTED MICRO-TUBULAR SOLID OXIDE FUEL CELLS WITH SACRIFICIAL INNER CORE" in Ceramic Engineering and Science Proceedings - Ceramic Materials for Energy Applications, Westerville, OH, USA: The American Ceramic Society, 2011, p. 161-170 -(Ceramic Engineering and Science Proceedings; 32 (9)). - ISBN: 9781118155820. Atti di: 35th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, USA, January 23-28, 2011 - vedi dettaglio
  • R. De la Torre, M. Casarin, M.V. Sglavo, "Production of Current Collector‐Supported Micro‐Tubular Solid Oxide Fuel Cells with Sacrificial Inner Core" in N.P. Bansal, P. Singh, D.S. Widjaja and Singh (a cura di), Advances in Solid Oxide Fuel Cells VII: Ceramic Engineering and Science Proceedings, Vol. 32, Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. - ISBN: 9781118059890 - vedi dettaglio
  • A. Arregui, L. Rodriguez-martinez, S. Modena, M. Bertoldi, J. van Herle, V. M. Sglavo, "Stability of ferritic perovskite cathodes in anode-supported solid oxide fuel cells under different processing and operation parameters" in ELECTROCHIMICA ACTA, v. 2011, n. 58 (2011), p. 312-321 - vedi dettaglio
  • A. Prette, V. Sglavo, O. Alarcon, M. Fredel, "Application of semiconductor ceramic glazes to high-voltage ceramic insulators" in 33rd International Conference on Advanced Ceramics and Composites: Advanced Ceramic Coatings and Interfaces IV, Hoboken: Wiley, 2010, p. 33-37 -(Ceramics Engineering And Science Proceedings). - ISBN: 9780470457535. Atti di: ICACC’09, Daytona Beach, 18th Jan- 23rd Jan 2009 - vedi dettaglio
  • M. Cologna, A.R. Contino, V.M. Sglavo, "Controllo della curvatura nella sinterizzazione di celle a combustibili planari" in Atti del 10° Convegno Nazionale AIMAT, Rende (CS) - Italy: Centro editoriale e librario - Università della Calabria, 2010, p. 185-188. - ISBN: 9788874581146. Atti di: 10° Convegno Nazionale AIMAT, Capo Vaticano (VV), 5th - 8th September 2010 - vedi dettaglio
  • M. Cologna, A. R. Contino, V. M. Sglavo, S. Modena, S. Ceschini, M. Bertoldi, "Curvature Evolution And Control In Anode Supported Solid Oxide Fuel Cells" in Advances in Solid Oxide Fuel Cells V, Hoboken, NJ, USA: J. Wiley and Sons, 2010, p. 95-104. - ISBN: 9780470457542. Atti di: 33th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, USA, 18-23 January, 2007 - vedi dettaglio
  • M. Piccinini, V.M. Sglavo, P. Robotti, "GRANULI POROSI IN IDROSSIAPATITE PER APPLICAZIONI BIOMEDICHE" in Atti del 10° Convegno Nazionale AIMAT, Rende (CS) - Italy: Centro editoriale e librario - Università della Calabria, 2010, p. 501-504. - ISBN: 9788874581146. Atti di: 10° Convegno Nazionale AIMAT, Capo Vaticano (VV) , 5th - 8th September 2010 - vedi dettaglio
  • F. De Genua, V.M. Sglavo, "HIGH MECHANICAL RELIABILITY ALUMINA/SILICON CARBIDE LAMINATED COMPOSITES BY SPARK PLASMA SINTERING" in 18th European Conference on Fracture Fracture of Materials and Structures from Micro to Macro Scale, Berlin, D: DVM, 2010, p. 136-136. - ISBN: 9783000318023. Atti di: 18th European Conference on Fracture Fracture of Materials and Structures from Micro to Macro Scale, Dresden, D, 30th August-3rd September 2010 - vedi dettaglio
  • V.M. Sglavo, F. De Genua, A. Conci, "INFLUENZA DELLA TEMPERATURA DI MATURAZIONE SULLA STRUTTURA DEL CEMENTO SOREL" in Atti del 10° Convegno Nazionale AIMAT, Rende (CS) - Italy: Centro editoriale e librario - Università della Calabria, 2010, p. 585-589. - ISBN: 9788874581146. Atti di: 10° Convegno Nazionale AIMAT, Capo Vaticano (VV), 5th - 8th September 2010 - vedi dettaglio
  • V.M. Sglavo, F. De Genua, "LAMINATI COMPOSITI IN ALLUMINA E CARBURO DI SILICIO MEDIANTE SPARK PLASMA SINTERING " in Atti del 10° Convegno Nazionale AIMAT, Rende (CS) - Italy: Centro editoriale e librario - Università della Calabria, 2010, p. 581-584. - ISBN: 9788874581146. Atti di: 10° Convegno Nazionale AIMAT, Capo Vaticano (VV), 5th - 8th September 2010 - vedi dettaglio
  • M. Cologna, R. De La Torre, V. M. Sglavo, R. Raj, "Micro-Tubular Solid Oxide Fuel Cells With Embedded Current Collector" in Advances in Solid Oxide Fuel Cells VI, Westerville, OH, USA: The American Ceramic Society, 2010, p. 15-21 -(Ceramic Engineering and Science Proceedings). - ISBN: 9780470594698. Atti di: 33rd International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, USA, 18th-23rd January 2009 - vedi dettaglio
  • M. Mashhadi, E. Taheri-nassaj, V. Sglavo, "Pressureless sintering of boron carbide" in CERAMICS INTERNATIONAL, v. 36, (2010), p. 151-159 - vedi dettaglio
  • V.M. Sglavo, E. Dalla Torre, G. Holler, "Procedimento per la produzione di pietre artificiali", ITTO20100927. - Data di deposito: 2010 - vedi dettaglio
  • M. Cologna, V. Sglavo, M. Bertoldi, "Sintering and Deformation of Solid Oxide Fuel Cells Produced by Sequential Tape Casting" in INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, v. 7, n. 6 (2010), p. 803-813 - vedi dettaglio
  • M. Cologna, V.M. Sglavo, "Vertical sintering to measure the uniaxial viscosity of thin ceramic layers" in ACTA MATERIALIA, v. 58, (2010), p. 5558-5564 - vedi dettaglio
  • V. M. Sglavo, "Vetro e radiazione solare: problematiche e prospettive di sviluppo per i sistemi fotovoltaici" in PV TECHNOLOGY, v. 4, n. 3 (2010), p. 46-51 - vedi dettaglio
  • C. Leonelli, E. Kamseu, D. N. Boccaccini, V. M. Sglavo, G. C. Pellacani, "Alkali-ions diffusion, mullite formation, and crystals dissolution during sintering of porcelain bodies: microstructural approach" in PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART L, JOURNAL OF MATERIALS, DESIGN AND APPLICATIONS., v. 2009, n. 223.4 (2009), p. 183-191. - DOI: 10.1243/14644207JMDA241 - vedi dettaglio
  • E. Kamseu, C. Leonelli, D.N. Boccaccini, P. Veronesi, V.M. Sglavo, U.C. Melo, D. Njopwouo, "Alkali-silica glassy matrix (AGM) as replacement for feldspar in conventional porcelain compositions" in SILICATES INDUSTRIELS, v. 74, n. 5-6 (2009), p. 131-138 - vedi dettaglio
  • V. Sglavo, F. De Genua, A. Molinari, F. Casari, "Alumina/Silicon Carbide Laminated Composites by Spark Plasma Sintering" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 92, n. 11 (2009), p. 2693-2697 - vedi dettaglio
  • C. Leonelli, E. Kamseu, V. M. Sglavo, "Bi-Axial Four Points Flexural and Compressive Strength of Geopolymer Materials Based Na2O-K2O-Al2O3-SiO2 Systems" in H.-T. Lin, K. Koumoto, W. M. Kriven, E. Garcia, I. E. Reimanis, D. P. Norton (a cura di), DEVELOPMENTS IN STRATEGIC MATERIALS, Hoboken, NJ, USA: Wiley & Sons, 2009, p. 155-164. - (CERAMIC ENGINEERING AND SCIENCE PROCEEDINGS; 29[10]). - ISBN: 9780470345009 - vedi dettaglio
  • M. Mashhadi, E. Taheri-nassaj, V.M. Sglavo, H. Sarpoolaky, N. Ehsani, "Effect of Al addition on pressureless sintering of B4C" in CERAMICS INTERNATIONAL, v. 35, n. 2 (2009), p. 831-837 - vedi dettaglio
  • M. Cologna, A.R. Contino, D. Montinaro, V. Sglavo, "Effect of Al and Ce doping on the deformation upon sintering in sequential tape cast layers for solid oxide fuel cells" in JOURNAL OF POWER SOURCES, v. 193, (2009), p. 80-85 - vedi dettaglio
  • Contino, A.R, Cologna, M., Modena, S., Sglavo, V.M., "Effect of doping elements on redox kinetics of NiO-YSZ powders for SOFC applications" in ECS TRANSACTIONS, v. 2009, n. 2(3) (2009), p. 2003-2012 - vedi dettaglio
  • V. Sglavo, "Il mosaico d’oro: resistenza meccanica e adesione" in Primo convegno interdisciplinare sul vetro nei beni culturali e nell’arte di ieri e di oggi, PARMA: tipocrom srl, 2009, p. 61-70. - ISBN: 8890149116 - vedi dettaglio
  • V.M. Sglavo, S. Pisetta, "Procedimento per lo sfaldamento di materiali lapidei lastrificati", 1352414. - Data di deposito: 2009 - vedi dettaglio
  • G.D. Sorarù, V.M. Sglavo, S. Ceschini, "Process for manufacturing ceramic resistors, and ceramic resistors obyained therewith", EP 1 575 064 B1. - Data di deposito: 2009 - vedi dettaglio
  • V. Sglavo, F. De Genua, A. Molinari, F. Casari, "Alumina-Silicon carbide laminated composites by spark plasma sintering" in 2nd International Congress on Ceramics, [S.l.]: Institute of Science and Technology for Ceramics, National Research Council, 2008, p. [n.d.]-[n.d.]. - ISBN: 9788880800842. Atti di: ICC2 proceedings , Verona, 29 juin-6 july, 2008 - vedi dettaglio
  • V.M. Sglavo, M. Cologna, R. Raj, "Cella a combustibile con struttura microtubolare e relativo procedimento di fabbricazione", TO2008A000456. - Data di deposito: 2008 - vedi dettaglio
  • A. Contino, D. Montinaro, S. Modena, M. Bertoldi, V. Sglavo, "Effect of pore former addition on NiO/YSZ anode microstructure and Redox tolerance of anode supported solid oxide fuel cells" in Global roadmap for ceramics & ICC2 proceedings : 2nd International Congress on Ceramics, Faenza: ISTEC-CNR, 2008, p. [n.d.]-[n.d.]. Atti di: ICC2, Verona, 29 June-4 July 2008 - vedi dettaglio
  • V. Sglavo, "Innovative mechanical performances of engineered oxide ceramics laminates" in Atti del congresso internazionale ICC2, Torino: ISTEC-CNR, 2008, p. [n.d.-n.d.]. Atti di: ICC2, Verona, 29/6-6/7/2008 - vedi dettaglio
  • D. Montinaro, A. Contino, V. Sglavo, "Microstructure Tailoring of Co-Sintered NiO/8YSZ – 8YSZ Laminates for SOFCs Applications" in Proceeding of the 10th ECerS Conference, Baden-Baden: Göller, 2008, p. 2192-2197. Atti di: 10th ECERS, Berlin, 17th-21st june 2007. - URL: http://www.ecers2007berlin.de/index.php?p=info&info=50 - vedi dettaglio
  • M. Leoni, M. Ortolani, M. Bertoldi, V. Sglavo, P. Scardi, "Nondestructive measurement of the residual stress profile in ceramic laminates" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 91, n. 4 (2008), p. 1218-1225. - URL: http://www.ingentaconnect.com/content/bsc/jace/2008/00000091/00000004/art00028 . - DOI: 10.1111/j.1551-2916.2008.02260.x - vedi dettaglio
  • V. Sglavo, "Nuove prospettive dello scambio ionico e doppia tempra: il vetro ESP" in RIVISTA DELLA STAZIONE SPERIMENTALE DEL VETRO, v. 38, n. 1 (2008), p. 29-34 - vedi dettaglio
  • A. Costabile, V. Sglavo, "Oxides ceramic laminates with different architectures and mechanical performances" in Proceedings of the 10th International conference of the European ceramic society, Baden-Baden: Göller, 2008, p. [n.d.]-[n.d.]. - ISBN: 9783872640222. Atti di: 10th ECERS, Berlin, 17th - 21st June 2007 - vedi dettaglio
  • Bertoldi, M., Zandonella, T., Montinaro, D., Sglavo, V.M., Fossati, A., Lavacchi, A., Giolli, C., Bardi, U., "Protective coatings of metallic interconnects for IT-SOFC application" in JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v. 2008, n. 5(1) (2008) - vedi dettaglio
  • E. Kamseu, C. Leonelli, V. Sglavo, "Resistenza a compressione ed a flessione di geopolimeri di composizione Na2O-K2O-Al2O3-SiO2" in 9° Convegno Nazionale di Scienza e Tecnologia dei Materiali, Napoli: Edizioni Ziino, 2008, p. 393-396. - ISBN: 9788890094866. Atti di: AIMAT 2008, Piano di Sorrento, 29 giugno-2 luglio,2008 - vedi dettaglio
  • E. Kamseu, C. Leonelli, V. Sglavo, "Thermal behaviour of geopolymer materials: influence of temperature on mineralogical composition and microstructure of sodium-potassium polysialates" in 2nd International Congress on Ceramics, [S.l.]: Institute of Science and Technology for Ceramics, National Research Council, 2008, p. [n.d.]-[n.d.]. - ISBN: 9788880800842. Atti di: ICC2 proceedings , Verona, 29 giugno - 4 luglio, 2008 - vedi dettaglio
  • M. Cologna, M. Bertoldi, V. Sglavo, "Water-based tape casting and co-sintering of bi-layers for SOFC applications" in Proceedings of ICC2, Faenza: Litografica Faenza, 2008, p. [n.d.]-[n.d.]. Atti di: ICC2, Verona, 29th June-4th July 2008 - vedi dettaglio
  • E. Kamseu, V. Sglavo, P. Veronesi, D. Njopwouo, C. Leonelli, D. Boccaccini, G. Pellacani, "Bending strength and elastic modulus of porcelain compositions under various specimen loading configurations" in INTERCERAM, v. 56, n. 6 (2007), p. 406-413 - vedi dettaglio
  • V. Sglavo, "ESP (Engineered Stress Profile) silicate glass; High strength material, insensitive to surface defects and fatigue" in Glass, Functional material for the future, [S.l.: s.n.], 2007, p. [n.d.]-[n.d.]. Atti di: Glass, Functional material for the future, Nancy, Francia, 16-17 novembre 2006 - vedi dettaglio
  • V. Sglavo, A. Prezzi, D. Green, "In situ observation of crack propagation in ESP (engineered stress profile) glass" in ENGINEERING FRACTURE MECHANICS, v. 74, n. 9 (2007), p. 1383-1398 - vedi dettaglio
  • V. Sglavo, C. Mueller, F. Righetti, "Influence of Edge Finishing on the Resistance to Thermal Stresses of Float Glass" in Glass performance days : professionals products processing conference proceedings, Tampere: Tamglass , 2007, p. 668-672. - ISBN: 9529186754. Atti di: 10th International conference on architectural and automotive glass, Tampere, Finlande, 15th-18th June, 2007 - vedi dettaglio
  • A. Costabile, V. Sglavo, "Influence of the architecture on the mechanical performances of alumina-mullite and alumina-mullite-zirconia ceramic laminates" in Proceedings of the 31th International conference on advanced ceramics and composites, New York, N.Y.: Wiley, 2007, p. 237-244. - ISBN: 9780470246795. Atti di: ICACC 31, Daytona Beach, FL, 21st - 26th January 2007 - vedi dettaglio
  • E. Kamseu, C. Leonelli, D. Boccaccini, P. Veronesi, V. Sglavo, U. Melo, D. Njopwouo, "Alkali-silica glassy matrixes as replacement for feldspar in conventional porcelain compositions" in 3rd international conference of the African materials research society, [S.l.: s.n.], 2006, p. [n.d.]-[n.d.]. Atti di: 3rd International conference of the African materials research society, Marrakech, 7th-10th December 2005 - vedi dettaglio
  • D. Montinaro, S. Modena, S. Ceschini, M. Bertoldi, T. Zandonella, A. Tomasi, V. Sglavo, "Anode supported solid oxide fuel cells with improved cathode/electrolyte interface" in Advances in electronic and electrochemical ceramics : proceedings of the 107th Annual meeting of the American ceramic society, Baltimore, Maryland, USA 2005, New York, NY: Wiley, 2006, p. [n.d.]-[n.d.] -(Ceramic transactions; 179). - ISBN: 9781574982626. Atti di: 107th Annual meeting of the American ceramic society, Baltimore, MD, 2005 - vedi dettaglio
  • M. Bertoldi, T. Zandonella, D. Montinaro, V. Sglavo, A. Quaranta, "Coatings for Ferritic Steels: How to Prevent Cr-Evaporation and Maintain a Low Contact Resistance?" in 7th European Solid Oxide Fuel Cell Forum, Oberrohrdorf, Switzerland: European Fuel Cell Forum, 2006, p. [n.d.]-[n.d.]. Atti di: European Fuel Cell Forum 2006, Lucerna, Svizzera, 3rd-7th July 2006 - vedi dettaglio
  • S. Modena, A. Tomasi, A. Lui, D. Montinaro, V. Sglavo, S. Ceschini, M. Bertoldi, "Cyclic Reduction and Oxidation Processes of Different SOFC Anodes" in 7th European Solid Oxide Fuel Cell Forum, Oberrohrdorf, Switzerland: European Fuel Cells Forum, 2006, p. [n.d.]-[n.d.]. Atti di: European Fuel Cell Forum 2006, Lucerna, Svizzera, 3rd-7th July 2006 - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "Design and Production of Ceramic Laminates with High Mechanical Reliability" in COMPOSITES. PART B, ENGINEERING, v. 37, n. 6 (2006), p. 481-489 - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "Design and Production of Ceramic Laminates with High Mechanical Resistance and Reliability" in ACTA MATERIALIA, v. 54, n. 18 (2006), p. 4929-4937 - vedi dettaglio
  • V. Sglavo, "ESP (Engineered Stress Profile) glass : material with high strength, insensitive to surface damage and fatigue" in Proceedings of MS&T’06, Cincinnati, OH: [S.n.], 2006, p. 717-724. Atti di: MS&T'06, Cincinnati, OH, 15th-19th October 2006 - vedi dettaglio
  • A. Chiappini, C. Armellini, S. Bhaktha, A. Chiasera, M. Ferrari, Y. Jestin, M. Mattarelli, M. Montagna, E. Moser, G. Nunzi Conti, S. Pelli, G. Righini, V. Sglavo, "Fabrication and optical assessment of sol-gel-derived photonic bandgap dielectric structures" in PROCEEDINGS OF SPIE, THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING, v. Vol. 6182, (2006), p. 618223-454-618223-463 - vedi dettaglio
  • S. Modena, A. Tomasi, S. Ceschini, D. Montinaro, V. Sglavo, M. Bertoldi, T. Zandonella, "Hydrogen application for energy production: electrochemical characterization of solid oxide fuel cells" in 1st world congress of young scientists on hydrogen energy systems : HYSYDAYS : proceedings hosted by eco-efficiency biennial, Torino: Begell House Inc., 2006, p. 283-288. Atti di: HYSYDAYS, Torino, 18th-20th May 2005 - vedi dettaglio
  • V. Sglavo, A. Costabile, "Influence of the architecture on the mechanical performances of alumina-zirconia and aluminazirconia-mullite ceramic laminates" in Materials Science & Technology 2006 , [S.l.: MS&T Partner Societies, 2006, p. 725-731. - ISBN: 9780470931547. Atti di: MS&T'06, Cincinnati, OH, 15th-19th October, 2006 - vedi dettaglio
  • A. Costabile, V. Sglavo, "Influence of the architecture on the mechanical performances of alumina-zirconia-mullite ceramic laminates" in P. Vincenzini (a cura di), 11th International ceramics congress, Zurich: Trans tech publications, 2006, p. 1103-1108. - (Advances in science and technology; 45). - ISBN: 9783908158011 - vedi dettaglio
  • S. Pisetta, V.M. Sglavo, "Method of cleavage of stone material", EP 1623808 B1. - Data di deposito: 2006 - vedi dettaglio
  • S. Modena, S. Ceschini, A. Tomasi, D. Montinaro, V. Sglavo, "Reduction and Reoxidation Processes of NiO/YSZ Composite for Solid Oxide Fuel Cell Anodes" in JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v. 3, n. 4 (2006), p. 487-491 - vedi dettaglio
  • Stefano Modena, Sergio Ceschini, Andrea Tomasi, Dario Montinaro, M. Vincenzo Sglavo, "Reduction and Reoxidation Processes of NiO∕YSZ Composite for Solid Oxide Fuel Cell Anodes" in JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v. 3, (2006), p. 487. - DOI: 10.1115/1.2349533 - vedi dettaglio
  • D. Montinaro, V. Sglavo, M. Bertoldi, T. Zandonella, S. Modena, S. Ceschini, A. Tomasi, "Solid oxide fuel cells fabrication by tape casting of water based suspensions" in 1st world congress of young scientists on hydrogen energy systems : HYSYDAYS : proceedings hosted by eco-efficiency biennial, New York, NY: Begell House Inc., 2006, p. 289-294. Atti di: HYSYDAYS, Torino, 18-20 maggio, 2005 - vedi dettaglio
  • D. Montinaro, M. Bertoldi, V. Sglavo, "Synthesis and Processing of Perovskite Oxides for Solid Oxide Fuel Cells Anode Fabrication" in P. Vincenzini (a cura di), Advances in Science and Technology 11th International Ceramics Congress, Zurich; Switzerland: Trans Tech Publications, 2006, p. 1864-1868. - ISBN: 9783908158011 - vedi dettaglio
  • V. Sglavo, D. Montinaro, T. Zandonella, M. Bertoldi, "Synthesis of oxide powders for applications in Solid Oxide Fuel Cells Interconnecting Materials" in Proceedings of the 30th International Conference on Advanced Ceramics and Composites, New York, NY: John Wiley & Sons, 2006, p. [n.d.-n.d.]. - ISBN: 9780470117026. Atti di: The 30th ICACC , Cocoa Beach, FL, 22th-27th January, 2006 - vedi dettaglio
  • D. Montinaro, V. Sglavo, M. Bertoldi, T. Zandonella, A. Aricò, M. Lo Faro, V. Antonucci, "Tape casting fabrication and co-sintering of solid oxide ôhalf cellsö with a cathodeûelectrolyte porous interface" in SOLID STATE IONICS, v. 177, n. 19-25 (2006), p. 2093-2097 - vedi dettaglio
  • V. Sglavo, C. Lorenzini, "Analysis of fracture behaviour in ESP glasses" in Proceedings of 11th International conference on fracture, [s.l.: s.n.], 2005, p. [n.d.]-[n.d.]. Atti di: ICF11, Torino, 20th-25th March 2005. - URL: http://www.icf11.com/proceeding/TOPIC/topic.htm - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "Ceramic Laminates with High Mechanical Reliability by Design" in Mechanical properties and performance of engineering ceramics and composites : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, Westerville, OH: American Ceramic Society, 2005, p. 363-370 -(Ceramic engineering and science proceedings; 26.2). - ISBN: 157498232X. Atti di: 29th International Conference on Advanced Ceramics and Composites, Cocoa Beach, FL, 23th-28th January 2005. - DOI: 10.1002/9780470291221.ch43 - vedi dettaglio
  • V. M. Sglavo, A. Prezzi, "ESP glass rupture disks, design and manufacture thereof", EP 1517073. - Data di deposito: 2005 - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "High reliability ceramic laminates by design" in Proceedings of 11th International Conference on Fracture, [s.l.: s.n.], 2005, p. [n.d.]-[n.d.]. Atti di: ICF11, Torino, 20th-25th March 2005. - URL: http://www.icf11.com/proceeding/TOPIC/topic.htm - vedi dettaglio
  • V. M. Sglavo, M. Bertoldi, M. Paternoster, "High reliability ceramic multilayer laminates, manufacturing process and design thereof", EP 1531041. - Data di deposito: 2005 - vedi dettaglio
  • M. Bertoldi, T. Zandonella, V. Sglavo, D. Montinaro, A. Ari, M. Lo Faro, V. Antonucci, "Improved cathode-electrolyte interface for planar solid oxide fuel cells" in 207th Meeting of The Electrochemical Society, Pennington, NJ: The electrochemical society, 2005, p. [n.d.]-[n.d.]. Atti di: SOFC-IX, Quebec, 15th-20th May 2005. - URL: http://www.ecsdl.org/getpdf/servlet/GetPDFServlet?filetype=pdf&id=MAECES000501000030001193000001&idtype=cvips&prog=normal - vedi dettaglio
  • F. Marino, A. Rebuffo, V. Sglavo, "Influence of bending fatigue on residual mechanical properties of a _-TiAl intermetallic alloy" in Proceedings of 11th international conference on fracture, Torino: Quinet, 2005, p. [n.d.]-[n.d.]. Atti di: ICF11, Torino, 20th-25th March 2005. - URL: http://www.icf11.com/proceeding/TOPIC/topic.htm - vedi dettaglio
  • V. Sglavo, A. Montenero, M. Aielli, G. Gnappi, A. Lorenzi, G. Royer Carfagni, "Mechanical properties of PbO-ZnO-P2O5 glasses" in PHYSICS AND CHEMISTRY OF GLASSES, v. v. 46, n. n. 5 (2005), p. 538-543 - vedi dettaglio
  • V. Sglavo, M. Bonafini, A. Prezzi, "Procedure for residual stress profile determination by curvature measurements" in MECHANICS OF MATERIALS, v. 37, n. 8 (2005), p. 887-898 - vedi dettaglio
  • G. Sorarù, V. M. Sglavo, S. Ceschini, "Process for manufacturing ceramic resistors, and ceramic resistors obtained therewith. European patent EP05101708.5, 4 marzo 2005.", EP1 575 064B1. - Data di deposito: 2005. - URL: https://register.epo.org/espacenet/application?number=EP05101708 - vedi dettaglio
  • L. Bergero, V. Sglavo, G. D. Sorarù, "Processing and Thermal Shock Resistance of a Polymer-Derived MoSi2/SiCO Ceramic Composite" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 88, n. 11 (2005), p. 3222-3225. - DOI: 10.1111/j.1551-2916.2005.00550.x - vedi dettaglio
  • V. Sglavo, M. Paternoster, M. Bertoldi, "Tailored Residual Stresses in High Reliability Alumina-Mullite Ceramic Laminates" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 88, n. 10 (2005), p. 2826-2832 - vedi dettaglio
  • V. Sglavo, A. Prezzi, T. Zandonella, "Engineered Stress Profile silicate glass: high strength material insensitive to surface defects and fatigue" in ADVANCED ENGINEERING MATERIALS, v. 6, n. 5 (2004), p. 344-349 - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "High mechanical reliability ceramic laminates by design" in Proceeding of the 104th meeting of the American ceramic society, Westerville, OH: American ceramic society, 2004, p. [n.d.]-[n.d.]. Atti di: 106th Annual meeting of the American ceramic society, Indianapolis, IN, 2004 - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "High reliability ceramic laminates by design" in 7° congresso AIMAT, [S.l.: s.n.], 2004, p. [n.d.]-[n.d.]. Atti di: AIMAT 2004, Ancona, 29 giugno - 2 luglio 2004 - vedi dettaglio
  • V. Sglavo, F. Bovo, M. Abrams, J. Shen, J. Glass, R. Tandon, D. Green, "Measurement of residual stresses in glass components: a comparison of different experimental techniques" in Proceeding of the 105th Meeting of the American Ceramic Society, Westerville, OH, USA: American Ceramic Society, 2004, p. [n.d.-n.d.]. Atti di: 105th Annual meeting of the American Ceramic Society, Nashville, TN, USA, 2003 - vedi dettaglio
  • G. D. Sorarù, V. Sglavo, S. Ceschini, "Procedimento per la realizzazione di resistori ceramici, e relativi resistori ceramici", TO2004A000161. - Data di deposito: 2004 - vedi dettaglio
  • V. Sglavo, S. Pisetta, "Procedimento per lo sfaldamento di materiali lapidei lastrificati", 1352414 . - Data di deposito: 2004 - vedi dettaglio
  • V. Sglavo, A. Prezzi, M. Alessandrini, "Processing of glasses with engineered stress profiles" in JOURNAL OF NON-CRYSTALLINE SOLIDS, v. 344, n. 1-2 (2004), p. 73-78 - vedi dettaglio
  • A. Prezzi, V. Sglavo, "Production of ESP (Engineered Stress Profile) glasses by physical treatments" in Proceedings of the 106th Meeting of the American Ceramic Society, Westerville, OH, USA: American Ceramic Society, 2004, p. [n.d.-n.d.]. Atti di: 106th Annual Meeting of the American Ceramic Society, Indianapolis, IN, USA, 2004 - vedi dettaglio
  • M. Bertoldi, V. Sglavo, "Soda-borosilicate glass: normal or anomalous behavior under Vickers indentation?" in JOURNAL OF NON-CRYSTALLINE SOLIDS, v. 344, n. 1-2 (2004), p. 51-59 - vedi dettaglio
  • A. Prezzi, V. Sglavo, "Surface relaxation of tempered soda-lime silicate glasses by infrared : a preliminary study" in Atti del 7. congresso AIMAT, Ancona: AIMAT, 2004, p. [n.d.]-[n.d.]. Atti di: AIMAT VII, Ancona, 29 giugno-2 luglio 2004. - URL: http://www.aimat.net/LinkClick.aspx?fileticket=y1WfQ4DDJlM%3D&tabid=71&language=it-IT - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "Vickers indentation: a powerful tool for the analysis of fatigue behavior on glass" in Indentation techniques in ceramic materials characterization, Westerville Oklahoma, OK: American ceramic society, 2004, p. 13-22. - (Ceramic Transactions; 156) - vedi dettaglio
  • E. Bernardo, G. Scarinci, E. Trentini, V. Sglavo, "A critical analisis of fracture toughness determination methods in glass or glass ceramic matrix composites" in MATERIALS ENGINEERING, v. 3, (2003), p. 317-336 - vedi dettaglio
  • G. D. Sorarù, V. Sglavo, D. D'Andrea, "A glass with functions of sensor for detecting fracture, stress and strani, and corresponding method of fabrication thereof", 2003 - vedi dettaglio
  • E. Trentini, J. Kubler, V. Sglavo, "Comparison of sandwiched beam (SB) and opposite roller loading (ORL) techniques for pre-cracking brittle materials" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 23, (2003), p. 1257-1262 - vedi dettaglio
  • E. Trentini, J. Kubler, V. Sglavo, "Comparison of the sandwiched beam (SB) and opposte roiller loading (ORL) techniques for pre-cracking brittle materials" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 23, (2003), p. 1257-1262 - vedi dettaglio
  • V. Sglavo, "ESP (Engineered Stress Profile) Glass: High Strength Material, Insensitive to Surface Defects": Tamglass ltd, 2003, p. 74-77. Atti di: Glass Processing Days, Tampere (Finlandia), 15-18/6 2003 - vedi dettaglio
  • V. Sglavo, A. Prezzi, "Fracture behavior and fatigue of ESP (Engineered Stress Profile) glass": American Ceramic Society, 2003. Atti di: 105th Annual Meeting of the American Ceramic Society, Nashville, TN, USA, 2003 - vedi dettaglio
  • V. Sglavo, T. Micheletti, S. Di Cuonzo, "Influence of crack geometry and loading mode on fracture and fatigue of soda-lime-silica glass" in PHYSICS AND CHEMISTRY OF GLASSES, v. 44, n. 5 (2003), p. 337-344 - vedi dettaglio
  • M. Bertoldi, M. Paternoster, V. Sglavo, "Production of multilayer ceramic laminates with improved mechanical properties" in N. Bansal, J. Singh, W. Kriven, H. Schneider (a cura di), Advances in ceramic matrix composites IX, Westerville, Okla.: American ceramic society, 2003, p. 89-102. - (Ceramic transactions; 153) - vedi dettaglio
  • T. Lube, R. Danzer, J. Kubler, J. Dusza, J. Erauw, H. Klemm, V. Sglavo, "Strength and Fracture Toughness of the ESIS Silicon Nitride Reference Material" in ECF 14 - Fracture Mechanics Beyond 2000, London: EMAS, 2003, p. 409-416 - vedi dettaglio
  • D.J. Green, V. Sglavo, R. Tandon, "Strengthening, Crack Arrest and multiple cracking in Brittle Materials Using Residual Stresses", US 6,516,634. - Data di deposito: 2003 - vedi dettaglio
  • D. J. Green, V.M. Sglavo, R. Tandon, "Strengthening, Crack Arrest and multiple cracking in Brittle Materials Using Residual Stresses", US 6,516,634. - Data di deposito: 2003 - vedi dettaglio
  • P. Vena, R. Contro, V. Sglavo, "Transformation toughening of Zirconia ceramics for biomedical application - a computational model", 2003, p. 151-161. Atti di: DCAMM International Symposium on Challenges in Applied Mechanics, Lyngby (Danimarca), 2003 - vedi dettaglio
  • V. Sglavo, A. Prezzi, "Analisi frattografica in situ di vetri ESP (Engineered Stress Profile)", 2002, p. 227-234. Atti di: XVI Convegno nazionale del Gruppo Italiano Frattura, Catania, 20-22 giugno 2002 - vedi dettaglio
  • D. Green, V. Sglavo, E. Beauchamp, S. Glass, "Designing residual stress profiles to produce flaw-tolerant glass" in R. Bradt (a cura di), Fracture Mechanics of Ceramics, Dordrecht ; Boston ; New York, N.Y.: Kluwer academic, 2002, p. 99-105 - vedi dettaglio
  • P. Bosetti, V. Sglavo, "Determination of fracture toughness of SiC-whiskers reinforced Si3N4 by two different techniques" in R. Bradt (a cura di), Fracture mechanics of ceramics, Dordrecht ; Boston ; New York, N.Y.: Kluwer academic, 2002, p. 193-201 - vedi dettaglio
  • V. Sglavo, A. Prezzi, F. Bovo, "FAtigue and Fracture of ESP (Engineered Stress Profile) Glass", 2002, p. 266-266. Atti di: 104th annual meeting of the American Ceramic Society, St. Louis MO USA, 28/4-1/5 2002 - vedi dettaglio
  • V. Sglavo, D. Green, "Fractography of ESP (Engineered Stress Profile) glass", 2002, p. 163-163. Atti di: 104th annual meeting of the American Ceramic Society, St. Louis MO USA, 28/4-1/5 2002 - vedi dettaglio
  • M. Bertoldi, V. Sglavo, "Influence of Composition on Fatigue Behavior and Threshold Stress Intensity Factor of Borosilicate Glasses" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 85, n. 10 (2002), p. 2499-2506 - vedi dettaglio
  • V. Sglavo, D. Green, "Measurement of fatigue limit in silicate glasses" in R. Bradt (a cura di), Fracture Mechanics of Ceramics, Dordrecht ; Boston ; New York, N.Y.: Kluwer academic, 2002, p. 305-312 - vedi dettaglio
  • V. Sglavo, F. Bovo, A. Prezzi, "Produzione di vetri ESP (Engineered Stress Profile) da vetri float di diversa provenienza", 2002. Atti di: AIMAT 2002, Modena, 8-11 settembre 2002 - vedi dettaglio
  • V. Sglavo, M. Bertoldi, A. Bonatti, "Riutilizzo di frazioni povere della lavorazione del porfido trentino nella produzione di manufatti mediante tecnologie ceramiche", 2002. Atti di: AIMAT 2002, Modena, 8-11 settembre 2002 - vedi dettaglio
  • E. Trentini, V. Sglavo, "The SB (Sandwiched Beam) technique for pre-cracking brittle materials" in R. Bradt (a cura di), Fracture mechanics of ceramics, Dordrecht ; Boston ; New York, N.Y.: Kluwer academic, 2002, p. 469-478 - vedi dettaglio
  • V. Sglavo, P. Bosetti, "Depth Seinsing Indentation: Authomatic Analysis of P-h Curves" in III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, 2001, p. A44-A44, Trento, 18-20 Giugno 2001 - vedi dettaglio
  • V. Sglavo, "ESP (Engineering Stress Profile) Glass: a Novel Approach to Obtain Improved Mechanical Performance", 2001, p. 11. Atti di: III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Trento, 18-20 giugno 2001 - vedi dettaglio
  • V. Sglavo, "ESP (Engineering Stress Profile) Glass: a Novel Approach to Obtain Improved Mechanical Performance" in RIVISTA DELLA STAZIONE SPERIMENTALE DEL VETRO, v. 6, (2001), p. 145-149 - vedi dettaglio
  • V. Sglavo, "Fatigue and Fracture of ESP (Engineered Stress Profile) Glass", 2001, p. 79. Atti di: Euromat 2001, Rimini, I, 10-14/6 2001 - vedi dettaglio
  • V. Sglavo, "Fatigue Behaviour of Borosilicate Glasses", 2001, p. 116-117. Atti di: XIX International Congress on Glass, Edimburgh, UK, 1-6/7 2001 - vedi dettaglio
  • V. Sglavo, D. Green, "Fatigue Limit in Fused Silica" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 21, (2001), p. 561-567 - vedi dettaglio
  • V. Sglavo, L. Larentis, D. Green, "Flaw Insensitive Ion-Exchanged Glass: I, Theoretical Aspects" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 84, n. 8 (2001), p. 1827-1831 - vedi dettaglio
  • V. Sglavo, D. Green, "Flaw Insensitive Ion-Exchanged Glass: II, Production and Mechanical Performance" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 84, n. 8 (2001), p. 1832-1838 - vedi dettaglio
  • V. Sglavo, M. Bertoldi, "Influence of Composition on Fatigue Behaviour of Borosilicate Glasses", 2001, p. B2. Atti di: III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Trento, 18-20 Giugno 2001 - vedi dettaglio
  • V. Sglavo, "Mechanical Performances of ESP (Engineered Stress Profile) Glasses", 2001, p. 108-109. Atti di: XIX Internationa Congress on Glass, Edimburgh, UK, 1-6/7 2001 - vedi dettaglio
  • E. Trentini, V. Sglavo, J. Kubler, "Production of Cracks with Different Length in Brittle Materials", 2001, p. A54. Atti di: III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Trento, 18-20 Giugno 2001 - vedi dettaglio
  • V. Sglavo, F. Bovo, A. Prezzi, "Production of ESP (Engineered Stress Profile) Glass Starting from Different Commercial Soda-Lime-Silicate Glasses", 2001, p. B25. Atti di: III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Trento, 18-20 Giugno 2001 - vedi dettaglio
  • A. Bonatti, V. Sglavo, "Reuse of Porphyry Rock Industry by-Products for the Production of Building Materials", 2001, p. A4. Atti di: III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Trento, 18-20 Giugno 2001 - vedi dettaglio
  • D. D'Andrea, V. Sglavo, G. D. Sorarù, "Silicate Plate Glass with Stress/Failure Sensing Function", 2001, p. A16. Atti di: III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Trento, 18-20 Giugno 2001 - vedi dettaglio
  • G.D. Sorarù, V.M. Sglavo, D. D’andrea, "Vetro con funzionalità di sensore di frattura, di sforzo e deformazione e relativo metodo di realizzazione", EP 1291631 . - Data di deposito: 2001 - vedi dettaglio
  • F. Marino, V. Sglavo, S. Gialanella, "Aspetti microstrutturali di una lega intermetallica -TiAl e loro influenza sulle proprietà meccaniche", 2000, p. 291-294. Atti di: 5° Congresso Nazionale AIMAT, Spoleto, 17-21 luglio 2000 - vedi dettaglio
  • V. Sglavo, R. Campostrini, S. Maurina, G. Carturan, G. Cocco, "BAUXITE RED MUD IN THE CERAMIC INDUSTRY. PART 1: THERMAL BEHAVIOUR" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 20 [3], (2000), p. 235-244 - vedi dettaglio
  • V. Sglavo, R. Campostrini, S. Maurina, G. Carturan, M. Monagheddu, G. Budroni, G. Cocco, "Bauxite 'Red Mud' in the Ceramic Industry. Part 1: Thermal Behaviour" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, (2000), p. 235-244 - vedi dettaglio
  • V. Sglavo, M. Bonafini, "Design and Production of High Reliability Soda-Lime Silicate Glass" in G. Müller (a cura di), Ceramics - Processing, Reliability, Tribology and Wear, Weinheim: Wiley-VCH, 2000, p. 353-358 - vedi dettaglio
  • V. Sglavo, M. Bonafini, "Engineered Residual Stress in Soda-Lime Silicate Glass", 2000. Atti di: International Congress of Glass Annual Meeting, Amsterdam, NL, 15-17/5 2000 - vedi dettaglio
  • E. Trentini, V. Sglavo, "La tecnica SB (Sandwiched Beam): influenza dei parametri operativi nella produzione di difetti acuti in materiali fragili", 2000, p. 331-334. Atti di: 5° Congresso Nazionale AIMAT, Spoleto, 17-21 luglio 2000 - vedi dettaglio
  • P. Bosetti, V. Sglavo, "Misura indiretta della durezza su materiali ceramici mediante indentazioni strumentate", 2000, p. 259-266. Atti di: XV Convegno Nazionale del Gruppo Italiano Frattura, Bari, 3-5 maggio 2000 - vedi dettaglio
  • S. Dirè, R. Ceccato, V. Sglavo, G. D. Sorarù, G. Carturan, "Phase interaction in polydimethylsiloxane-oxide hybrid xerogels", 2000, p. 145-152. Atti di: 2° Workshop Italiano Sol-Gel, Parma, 21-22 Settembre 2000 - vedi dettaglio
  • V. Sglavo, A. Conci, A. Tomasi, "Possibilità di riutilizzo di scarti del porfido come materia prima per manufatti per l'edilizia", 2000, p. 443-445. Atti di: 5° Congresso Nazionale AIMAT, Spoleto, 17-21 luglio 2000 - vedi dettaglio
  • G. Carturan, N. Khandelwal, L. Tognana, V. Sglavo, "Strengthening of soda-lime-silica glass by surface treatment with sol-gel silica" in JOURNAL OF NON-CRYSTALLINE SOLIDS, v. 353, (2000), p. 1540-1545 - vedi dettaglio
  • S. Dirè, V. Sglavo, A. Pegoretti, G. D. Sorarù, "Structure-properties behavior during aging of hybrid polymethylsiloxane-oxide materials prepared by the sol-gel process" in 9th Meeting on Synteses and Methodologies in Inorganic Chemistry (SAMIC): New Compounds and Material, 2000, p. 158-161, Bressanone, Dicembre 2000 - vedi dettaglio
  • V. Sglavo, "Testing of Ceramics and Glasses by Indentation Techniques" in G. Müller (a cura di), Ceramics - Processing, Reliability, Tribology and Wear, Weinheim: Wiley-VCH, 2000, p. 365-377 - vedi dettaglio
  • V. Sglavo, "Vetri ESP (Engineered Stress Profile): un approccio ingegneristico alla produzione di vetri temprati", 2000, p. 987-990. Atti di: 5° Congresso Nazionale AIMAT, Spoleto, 17-21 luglio 2000 - vedi dettaglio
  • V. Sglavo, G. Carturan, S. Maurina, A. Conci, A. Salviati, G. Cocco, "Bauxite 'Red Mud' in the Ceramic Industry. Part 2: Production of Clay-Based Ceramics" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, (1999) - vedi dettaglio
  • D.J. Green, P.J. Dwivedi, V. Sglavo, "Characterisation of Sub-critical Crack Growth in Ceramics using Indentation Cracks" in BRITISH CERAMIC TRANSACTIONS, v. 98 (6), (1999), p. 291-295 - vedi dettaglio
  • V. Sglavo, D. Green, R. Tandon, "Crack Arrest and Multiple Cracking in Glass Using Designed Residual Stress Profiles" in SCIENCE, v. 283, (1999), p. 1295-1297 - vedi dettaglio
  • D.J. Green, R. Tandon, V. Sglavo, "CRACK ARREST ND MULTIPLE CRACKING IN GLASS THROUGH THE USE OF DESIGNED RESIDUAL STRESS PROFILES" in SCIENCE, v. 283, (1999), p. 1295-1297 - vedi dettaglio
  • V. Sglavo, D. Green, P. Cai, "Damage in AI2O3 Sintering Compacts under Very Low Tensile Stress" in JOURNAL OF MATERIALS SCIENCE LETTERS, v. 18, (1999), p. 895-900 - vedi dettaglio
  • V. Sglavo, S. Renzi, "Fatigue Limit in Borosilicate Glass by Interrupted Static Fatigue Test" in PHYSICS AND CHEMISTRY OF GLASSES, v. 40, n. 2 (1999), p. 79-84 - vedi dettaglio
  • V. Sglavo, E. Trentini, M. Boniecki, "Fracture Toughness of High Purity Alumina at Room Temperature" in JOURNAL OF MATERIALS SCIENCE LETTERS, v. 18, (1999), p. 1127-1130 - vedi dettaglio
  • V. Sglavo, D. Green, "Indentation Determination of Fatigue Limits in Silicate Glasses" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 82, n. 5 (1999), p. 1269-1274 - vedi dettaglio
  • E. Trentini, V. Sglavo, "La tecnica SB (Sandwiched beam) per la propagazione di intagli acuti in materiali fragili nelle configurazioni di flessione in tre e quattro punti", 1999, p. 737-746. Atti di: AIAS ’99, Vicenza, 8-11 settembre 1999 - vedi dettaglio
  • V. Sglavo, G. Carturan, M. Monagheddu, G. Cocco, "Production of Cements from Bauxite Red Mud", 1999. Atti di: 2nd National Congress Valorisation and Recycling of Industrial Wastes, L'Aquila, 5-8 luglio 1999 - vedi dettaglio
  • V. Sglavo, "Progettazione e produzione di vetri ad alta resistenza e affidabilità", 1999, p. 737-746. Atti di: AIAS ’99, Vicenza, 8-11 settembre 1999 - vedi dettaglio
  • V. Sglavo, D. Green, P. Dwivedi, "Relaxation of Indentation Residual Stress in Aluminia: Experimental Observation by X-ray Diffraction" in BRITISH CERAMIC PROCEEDINGS, (1999) - vedi dettaglio
  • V. Sglavo, G. Carturan, M. Dal Monte, M. Muraca, "SiO2Entrapment of Animal Cells. Part 1: Mechanical Features of Sol- Gel SiO2 Coatings" in JOURNAL OF MATERIALS SCIENCE, v. 34, (1999), p. 3587-3590 - vedi dettaglio
  • V. Sglavo, S. Dirè, M. Ferrari, "Structure-Property Behaviour during Aging of Sol-Gel Derived Silica Modified with Si-H and Si-CH3 Groups" in JOURNAL OF MATERIALS RESEARCH, v. 14, n. 5 (1999), p. 2100-2106 - vedi dettaglio
  • V. Sglavo, F. Marino, B. Zhang, "The Preparation and Mechanical Properties of AI2O3/Ni3AI Composite" in COMPOSITES SCIENCE AND TECHNOLOGY, v. 59, (1999), p. 1207-1212 - vedi dettaglio
  • V. Sglavo, P. Bosetti, E. Trentini, M. Ceschini, "The SB (Sandwiched Beam) Procedure for Pre-Cracking Brittle Materials" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 82, n. 8 (1999), p. 2269-2272 - vedi dettaglio
  • G. Plizzari, M. Palumbo, V. Sglavo, E. Tempesti, "Effetto della Presenza di Macro-Difetti e della Temperatura sul Comportamento Strutturale del Vetro Multistrato", 1998, p. 145-152. Atti di: IGF14, Trento, 27-28 giugno 1998 - vedi dettaglio
  • V. Sglavo, P. Bosetti, "Fracture Toughness of SiC-Whiskers-Reinforced Silicon Nitride at Various Temperatures", 1998. Atti di: 9th CIMTEC, Firenze, 14-19 June 1998 - vedi dettaglio
  • V. Sglavo, D. Green, "Indentation Fatigue Testing of Soda-Lime Silicate Glass" in JOURNAL OF MATERIALS SCIENCE, n. 34 (1998), p. 579-585 - vedi dettaglio
  • C. Camin, V. Sglavo, "Influenza delle Condizioni Superficiali sulla Resistenza a Frattura di Vetri Rinforzati Mediante Tempra Chimica", 1998, p. 217-224. Atti di: IGF14, Trento, 27-28 giugno 1998 - vedi dettaglio
  • E. Trentini, P. Bosetti, M. Ceschini, V. Sglavo, "Nuova Tecnica per la Produzione di Difetti Acuti in Materiali Fragili", 1998, p. 225-232. Atti di: IGF14, Trento, 27-28 giugno 1998 - vedi dettaglio
  • V. Sglavo, L. Larentis, C. Camin, "Nuovi Vetri per Impieghi Strutturali", 1998, p. 416-423. Atti di: IV Convegno AIMAT, Cagliari, 8-11 giugno 1998 - vedi dettaglio
  • G. Carturan, A. Conci, R. Dal Maschio, S. Maurina, A. Salviati, V. Sglavo, G. Cocco, M. Monagheddu, S. Doppiu, "Possibilità di Utilizzo dei Fanghi Rossi in Applicazioni Industriali", 1998, p. 552-559. Atti di: IV Convegno AIMAT, Cagliari, 8-11 giugno 1998 - vedi dettaglio
  • V. Sglavo, F. Marino, B. Zhang, "Post-Hot-Pressing and High-Temperature Bending Strength Of Reaction-Bonded Silicon Nitride-Molybdenum Disilicide and Silicon Nitride-Tungsten Silicide Composites" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 81, n. 5 (1998), p. 1344-1348 - vedi dettaglio
  • V. Sglavo, S. Maurina, R. Campostrini, A. Salviati, A. Conci, G. Carturan, G. Budroni, M. Monagheddu, G. Cocco, "Potential Utilization of Red Mud in Industrial Applications", 1998. Atti di: Int’l Training Course on Technologies for the Valorization and Recycling of Mineral and Industrial Wastes, Iglesias, Italy, 30-11/1-12 1998 - vedi dettaglio
  • P. Pancheri, P. Bosetti, R. Dal Maschio, V. Sglavo, "Production of Sharp Cracks in Ceramic Materials by Three-Point Bending of Sandwiched Specimens" in ENGINEERING FRACTURE MECHANICS, v. 59, n. 4 (1998), p. 447-456 - vedi dettaglio
  • F. Marino, R. Delorenzo, V. Sglavo, "Prove di Fattibilità di una Valvola per Motori a Combustione Interna Prodotta con la Lega Ordinata Ti-47 Al-2 Nb-2 Cr-1 B", 1998, p. 68-76. Atti di: IV Convegno AIMAT, Cagliari, 8-11 giugno 1998 - vedi dettaglio
  • M. Leoni, P. Scardi, V. Sglavo, "Relaxation of indentation residual stress in alumina: Experimental observation by X-ray diffraction" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 18, n. 12 (1998), p. 1663-1668. - URL: http://linkinghub.elsevier.com/retrieve/pii/S0955221998000867 . - DOI: 10.1016/S0955-2219(98)00086-7 - vedi dettaglio
  • L. Conti, T. Toninato, V. Sglavo, F. Boella, "Resistenza a Frattura di Contenitori in Vetro Utilizzati nella Confezione di Vino Spumante", 1998, p. 161-168. Atti di: IGF14, Trento, 27-28 giugno 1998 - vedi dettaglio
  • P. Bosetti, V. Sglavo, "Comportamento a Frattura di un Composito Si3N4-SiCw al Variare della Temperatura", 1997. Atti di: Convegno IGF13, Cassino, 27-28 Maggio 1997 - vedi dettaglio
  • V. Sglavo, P. Pancheri, "Crack Decorating Technique for Fracture Toughness Measurement in Aluminia" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 17, (1997), p. 1697-1706 - vedi dettaglio
  • V. Sglavo, T. Micheletti, M. Gadotti, "Cyclic Loading Behaviour Of Soda-Lime Silicate Glass Using Indentation Cracks" in FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, v. 20, n. 8 (1997), p. 1225-1234 - vedi dettaglio
  • B. Zhang, F. Marino, V. Sglavo, S. Gialanella, "In Situ Formation and High- Temperature Reinforcing Effect of MoSi2 and WSi2 on Reaction- Bonded Si3N4" in MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 239-240, (1997), p. 503-506 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, L. De Riu, F. Geotti-bianchini, "Influence of Aluminia Content and Modifiers on Phase Separation in Soda-Lime-Silica-Glasses" in GLASS TECHNOLOGY, v. 2, (1997), p. 42-47 - vedi dettaglio
  • V. Sglavo, P. Colombo, E. Pippel, J. Woltersdorf, "Joining of Reaction-Bonded Silicon Carbide using a Preceramic Polymer" in JOURNAL OF MATERIALS SCIENCE, v. 33, (1997), p. 2405-2412 - vedi dettaglio
  • V. Sglavo, F. Marino, B. Zhang, S. Gialanella, "Ni3AI Intermetallic Compound as Second Phase in AI2-O3 Ceramic Composites" in MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 239/240, (1997), p. 665-671 - vedi dettaglio
  • E. Trentini, P. Pancheri, V. Sglavo, "Tenacità a Frattura di Allumina a 25°C e 800°C", 1997. Atti di: IGF13, Cassino, 27-28 giugno 1997 - vedi dettaglio
  • V. Sglavo, L. Larentis, "Vetri ad Alta Resistenza e Affidabilità", 1997, p. 943-950. Atti di: FAST Materiali, Milano, 10-14 novembre 1997 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, "Controlled Indentation-Induced Cracks for the Determination of Fracture Toughness in Aluminia" in R. Bradt (a cura di), Fracture Mechanics of Ceramics, New York, N.Y.: Plenum press, 1996, p. 233-243 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, L. Brundì, A. Conci, "Crescita Sub-critica di Difetti Controllati Ottenuti Mediante Indentazione Vickers nel Vetro", 1996, p. 137-145. Atti di: XII Convegno Nazionale del Gruppo Italiano Frattura, Parma, 12-13 giugno 1996 - vedi dettaglio
  • V. Sglavo, D. Green, S. Martz, R. Tressler, "Determination of Threshold Stress Intensity Factor for Sub-critical Crack Growth in Ceramic Materials by Interrupted Static Fatigue Test" in R. Bradt (a cura di), Fracture Mechanics of Ceramics, New York, N.Y.: Plenum press, 1996, p. 167-177 - vedi dettaglio
  • V. Sglavo, M. Gadotti, P. Pancheri, R. Dal Maschio, "Fatica Ciclica nel Vetro Sodico-Calcico", 1996. Atti di: AIMAT, Napoli, 25-27 settembre 1996 - vedi dettaglio
  • F. Marino, R. Delorenzo, S. Gialanella, V. Sglavo, B. Zhang, "Il composto intermetallico Ni3Alnella tenacizzazione di materiali ceramici.", 1996, p. 731-737. Atti di: AIMAT, Napoli, 25-27 settembre 1996 - vedi dettaglio
  • V. Sglavo, P. Pancheri, R. Dal Maschio, "Tenacità a Frattura di Allumina ad Alta Temperatura" in Atti del convegno AIMAT, Napoli: N/a, 1996, p. x-x. Atti di: AIMAT, Napoli, 25-27 settembre 1996 - vedi dettaglio
  • V. Sglavo, D. Green, "The sub-critical indentation fracture process In soda-lime-silica glass" in ENGINEERING FRACTURE MECHANICS, v. 55, n. 1 (1996), p. 35-46 - vedi dettaglio
  • V. Sglavo, D. Green, "Threshold Stress Intensity Factor In Soda-Lime Silicate Glass By Interrupted Static Fatigue Test" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, n. 16 (1996), p. 645-651 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, "Crescita sub-Critica dei Difetti nei Materiali Ceramici in Relazione alle Loro Applicazioni Strutturali", 1995, p. 71-80. Atti di: IGF 11, Brescia, 4-6 luglio 1995 - vedi dettaglio
  • V. Sglavo, S. Martz, S. Newcomb, K. Rugg, R. Tressler, "Delayed Failure of Ceramic Fibers at Elevated Temperatures" in A. Evans, R. Naslain (a cura di), High Temperature Ceramic-Matrix Composites I: Design, Durability and Performance, Westerville, Okla.: American ceramic society, 1995, p. 375-380. - (Ceramic Transactions; 57) - vedi dettaglio
  • V. Sglavo, C. Melandri, S. Guicciardi, G. De Portu, R. Dal Maschio, "Determination of Fracture Toughness in Fine-grained Alumina with Glassy Phase by Controlled indentation-Induced Cracks at room and High Temperature", 1995, p. 99-106. Atti di: Proceedings of the Fourth ECERS, Riccione, Italy, October 2-6 1995 - vedi dettaglio
  • V. Sglavo, D. Green, "Determination of the Threshold Stress Intensity Factor for Sub-Critical Crack Growth in Soda-Lime Silicate Glass by Interrupted Static Fatigue Test", 1995, p. 295-300. Atti di: XVII Congress on Glass, Beijing, China, 9-14 ottobre 1995 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, "Fatigue Phenomena in Ceramic Materials: Design Consideration for Structural Applications", 1995, p. 195-204. Atti di: International Symposium on Material Ageing and Component Life Extension, Milan (Italy), October 10-13 1995 - vedi dettaglio
  • V. Sglavo, D. Green, "Influence of Indentation C rack Configuration on Strength and Fatigue Behaviour of Soda-Lime Silicate Glass" in ACTA METALLURGICA ET MATERIALIA, v. 43, (1995), p. 965-972 - vedi dettaglio
  • V. Sglavo, S. Dirè, G. D. Sorarù, "Mechanical characterization of hybrid gel films", 1995, p. 179-185. Atti di: Eurogel '92, Colmar, 1995 - vedi dettaglio
  • G. Carturan, R. Ceccato, R. Campostrini, V. Sglavo, "SiO2/SnO2 and Sn/Sb-oxide/SiO2 Gel -Derived Composites. Part 2: Thermal Evolution and Phase Analysis" in JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, v. 5, (1995), p. 57-64 - vedi dettaglio
  • V. Sglavo, D. Green, "Subcritical Growth of Indentation Median Cracks" in JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v. 78, (1995), p. 650-656 - vedi dettaglio
  • V. Sglavo, D. Green, "The Interrupted Static Fatigue Test for Evaluating Threshold Stress Intensity Factor in Ceramic Materials: A Numerical Analysis" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 15, (1995), p. 777-785 - vedi dettaglio
  • V. Sglavo, S. Dirè, "Aging Effect on the Mechanical Properties of Hybrid Gels" in JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, v. 2, (1994), p. 143-146 - vedi dettaglio
  • V.M. Sglavo, S. Dirè, "Aging Effect on the Mechanical Properties of Hybrid Gels" in JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, v. 2, n. 2 (1994), p. 143-146 - vedi dettaglio
  • V. Sglavo, D. Green, "Determinazione della Soglia di Fatica nei Materiali Ceramici", 1994, p. 903-910. Atti di: AIMAT, Trento, 19-21 settembre 1994 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, L. Mattivi, L. Bertamini, S. Sturlese, "Indentation Method for Fracture Resistance Determination of Metalic-Ceramic Interfaces in Thick TBCs" in JOURNAL OF THERMAL SPRAY TECHNOLOGY, v. 3, n. 1 (1994), p. 51-56 - vedi dettaglio
  • P. Pancheri, P. Marchi, V. Sglavo, R. Dal Maschio, "Valutazione della Tenacità a Frattura di Materiali Ceramici Mediante l'Utilizzo di Cricche da Indentazione", 1994, p. 895-902. Atti di: AIMAT, Trento, 19-21 settembre 1994 - vedi dettaglio
  • V. Sglavo, F. Carlin, R. Dal Maschio, "Caratterizzazione della Resistenza a Frattura di Interfacce Metallo-Ceramico", 1993, p. 441-452. Atti di: IGF 9, Roma, 2-4 giugno 1993 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, G. D. Sorarù, "Effect of Etch Depth on Strength of Soda-Lime Glass Rods by a Statistical Approach" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, n. 11 (1993), p. 341-346 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, G. D. Sorarù, A. Bellosi, "Fabrication and Characterization of Polymer-Derived Si2N2O-ZrO2 Nanocomposite Ceramics" in JOURNAL OF MATERIALS SCIENCE, v. 28, (1993), p. 6437-6441 - vedi dettaglio
  • G. D. Sorarù, V. Sglavo, S. Dirè, G. D'Andrea, F. Babonneau, "High strength, high modulus silicon oxycarbide glasses" in 3rd Euroceramics, Castellón de la Plana: Faenza editrice ibérica, 1993, p. 1157-1162 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, G. D. Sorarù, G. Carturan, "Sol-Gel Derived SiO2-ZrO2 Nanocomposite Fibers: Influence of Composition Thermal Treatment and Microstructure on Tensile Strength" in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, n. 11 (1993), p. 439-444 - vedi dettaglio
  • L. Pawlosky, R. Zacchino, R. Dal Maschio, V. Sglavo, J. Andresen, F. Driller, "Structure-Properties Relationship in Plasma Sprayed Chromium Oxide Coatings", 1993, p. 132-137. Atti di: Thermal Spraying Conference (TS '93), Aachen, FRG, Marzo 1993 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, "Caratterizzazione di Fibre Ceramiche del Sistema SiO2-ZrO2 Ottenute Mediante la Tecnica Sol-Gel", 1992, p. 387-398. Atti di: Omaggio Scientifico a Renato Turriziani, Roma, aprile 1992 - vedi dettaglio
  • R. Dal Maschio, F. Geotti-bianchini, V. Sglavo, P. Angelini, "Influence of Alumina Content on Homogeneus Nucleation in 57.5 SiO2 - 21.25 Na2O - 21.25 CaO (mol%) Glass", 1992, p. 47-52. Atti di: Proceedings del XVI International Congress on Glass, Madrid (Spain), ottobre 1992 - vedi dettaglio
  • R. Dal Maschio, V. Sglavo, F. Rigoni, L. Bertamini, E. Galvanetto, "Measurement of Metal-Ceramic Adhesion by indentation Technique in Thick TBC's", 1992, p. 947-951. Atti di: International Thermal Spray Conference (ITSC '92), Orlando (Florida), giugno 1992 - vedi dettaglio
  • G. D. Sorarù, V. Sglavo, R. Campostrini, R. Dal Maschio, "Neoceramici a Base di Nitruro di Silicio da Preursori Polimerici", 1992, p. 377-386. Atti di: Omaggio Scientifico a Renato Turriziani, Roma, aprile 1992 - vedi dettaglio
  • V. Sglavo, U. Brenna, G. Carturan, G. D. Sorarù, "Viscosity Behaviour of SiO2-ZrO2 Gelling Solutions: Effect of Acetic Anhydride Addition" in JOURNAL OF NON-CRYSTALLINE SOLIDS, v. 147-148, (1992), p. 695-698 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, "Analisi dell'Effetto della Profondità di Attacco sulla Resistenza a Frattura di Barrette di Vetro Sodico-Calcico meiante un Approccio Statistico", 1991, p. 203-216. Atti di: IGF7, Firenze, 13-14 Giugno 1991 - vedi dettaglio
  • V. Sglavo, R. Dal Maschio, "Adhesion Testing of plasma Sprayed Ceramic Coatings on Metals by an Indentation Technique" in H. Matzke, E. Toscano (a cura di), Indentation Techniques, Amsterdam: Harwood academic, 1990, p. 1487-1494 - vedi dettaglio
  • R. Dal Maschio, V. Sglavo, G. D. Sorarù, "Fracture Mechanics Determination of Stress Profiles in Na-K ion Exchanged" in MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 119, n. 119 (1989), p. 9-12 - vedi dettaglio